Hello my friends i want try make famicom card but diagram/pinouts does not fit on pictures
27C256
Q7 is D7 ? and next and next... I'm confused pls help
whats EXP, E, G, where is chr /wr
eprom and cartridge pinouts
Moderator: Moderators
Re: eprom and cartridge pinouts
Yes, Q7 is D7. The EXP pins are audio in/out. /G is output enable, /E is chip enable. CHR /WR is only used with CHR-RAM, can't do anything with that if you're using ROM.
On the CHR side, CHR /RD would be connected to output enable, and usually CHR /A13 would be connected to chip enable.
On the CHR side, CHR /RD would be connected to output enable, and usually CHR /A13 would be connected to chip enable.
Re: eprom and cartridge pinouts
Here I have tried to break down, But I have a doubt is
???1,2,3,4,5,6,7 heelp please
???1 on (OE)
???3 is joint 44/32 pins and PRG A15 right? im comfused
???1,2,3,4,5,6,7 heelp please
???1 on (OE)
???3 is joint 44/32 pins and PRG A15 right? im comfused
Re: eprom and cartridge pinouts
That pin 44 is what I call PRG /CE, it will be active (low) whenever the NES is accessing memory at $8000-$FFFF. So you'll probably want that connected to the /CE pin of your PRG-ROM.
Read the signal descriptions here, that should help clear things up.
http://wiki.nesdev.com/w/index.php/Cartridge_connector
Read the signal descriptions here, that should help clear things up.
http://wiki.nesdev.com/w/index.php/Cartridge_connector
Re: eprom and cartridge pinouts
tnx !! and sorry my english