Famicom controller in a NES

Discuss hardware-related topics, such as development cartridges, CopyNES, PowerPak, EPROMs, or whatever.

Moderators: B00daW, Moderators

Post Reply
User avatar
nnov
Posts: 21
Joined: Tue May 09, 2017 4:02 am
Location: Uruguay
Contact:

Famicom controller in a NES

Post by nnov » Sat Nov 24, 2018 9:18 am

I have a few perfectly working controllers I have removed from a HVC-001 and that I want to use on my NES-001 and HVC-101.
I've searched the forums but haven't found anything about this.

EDIT:

Through the internet I have found this: https://www.raphnet.net/electronique/fa ... dex_en.php
Which is to plug a zapper or controllers that have that particular port plug.

What I want to do is to build an adapter from what I show in the picture, to plug this in a NES.

Does anyone know any project?

Thanks!
Attachments
3aee2365-a139-437d-ab31-5eed1712d9d2.jpeg

pwnskar
Posts: 117
Joined: Tue Oct 16, 2018 5:46 am
Location: Gothenburg, Sweden

Re: Famicom controller in a NES

Post by pwnskar » Sun Nov 25, 2018 10:42 am

I did this but the other way around, hooking up the ends of extension chords to my Sharp Twin Famicom inplace of the regular controllers. So instead of those short wired controllers sticking out the back I have regular NES extension chords.

But why would you want to hook up an internal Famicom controller to an NES? The chords are really short and the connector is not really well suited for being accidentally pulled every now and then. If it's for looks you could just switch casing with an NES controller.

If you want to be able to hook up third party controllers that use the 15-pin connectors you can make an adapter for that using a neogeo and an NES extension chord. Here's a schematic for that:

Image

spacemonkey
Posts: 10
Joined: Tue Jul 19, 2011 12:53 am

Re: Famicom controller in a NES

Post by spacemonkey » Mon Nov 26, 2018 1:41 am

The easiest way is to get a US NES pad and remove the pcb with the cable attached and put them in the famicom pad casing.

Ziggy587
Posts: 117
Joined: Fri Oct 08, 2010 6:08 pm
Location: NY, USA

Re: Famicom controller in a NES

Post by Ziggy587 » Wed Nov 28, 2018 1:58 pm

I have also used the wire diagram posted above to make controller adapters. I did it primarily to use NES controllers on a Famicom, but it works the other way around as well. Just grab some NES controller extension cables off eBay or the like, they're usually pretty cheap. Then just cut off one end and wire it on to your Famicom controllers. And doing it this way, you wont have to worry about the short wire length of the Famicom controllers.

http://www.racketboy.com/forum/viewtopi ... 25&t=25087

Hilaa
Posts: 9
Joined: Thu Nov 21, 2019 6:13 am

Re: Famicom controller in a TWIN FAMICOM

Post by Hilaa » Thu Nov 21, 2019 6:22 am

Hi, I just bought a 15 pin controller to connect it to the right side of my twin famicom, the problem I have is that the controller works perfectly in the everdrive menu, however it does not work when loading games. Anyone know why? tnx

tepples
Posts: 22014
Joined: Sun Sep 19, 2004 11:12 pm
Location: NE Indiana, USA (NTSC)
Contact:

Re: Famicom controller in a NES

Post by tepples » Thu Nov 21, 2019 8:30 am

The EverDrive problem is a duplicate post. Answered here.

Post Reply