Page 1 of 2

New CIC Clone by Krikzz available (AVRCICZZ)

Posted: Mon Feb 11, 2013 8:00 pm
by SkinnyV
Hey guy, Krikzz just posted his new CIC clone he coded for the new Everdrive N8 NES version. It use attiny13. You can grab the code and binary right now:

http://krikzz.com/pub/support/everdrive ... rciczz.zip

http://krikzz.com/pub/support/everdrive ... czz-v2.zip

http://krikzz.com/pub/support/everdrive ... czz-v3.zip

I know he's hoping for someone with a PAL system to try it out for him as he was only able to test it on an american NES but the code is supposed to be multi-region like the SuperCIC is for the SNES. Pretty impressive that he managed to do that in 3 days.

If anyone with a PAL NES try this out it would be cool to let him know the result.

Edit: Krikzz was able to test it on PAL NES and had to update the code to make it work, new link added.

Re: New CIC Clone by Krikzz available (AVRCICZZ)

Posted: Mon Feb 11, 2013 8:53 pm
by DSC
Just ordered a few attiny13's and I I have a PAL NES to try it on.
Will report back. Great find!

Re: New CIC Clone by Krikzz available (AVRCICZZ)

Posted: Mon Feb 11, 2013 9:10 pm
by 3gengames
Cool! Hopefully JCIC is still put out, and documented on the wiki possibly. Thanks to him for open sourcing it, but still, thanks to everyone making these from jimcool to kriz. :)

Re: New CIC Clone by Krikzz available (AVRCICZZ)

Posted: Mon Feb 11, 2013 9:59 pm
by SkinnyV
I tried it and (as expected) it work perfectly on my NES. For those using universal programmer (I use GQ-4x) with software that can't open ELF production file and need to manually set the fuse, here are the required fuses settings:
Ext.Clock; Start-Up time: 14CK+ 0ms; [CKSEL=00 SUT=00]

Re: New CIC Clone by Krikzz available (AVRCICZZ)

Posted: Mon Feb 11, 2013 11:15 pm
by DSC
SkinnyV wrote:I tried it and (as expected) it work perfectly on my NES. For those using universal programmer (I use GQ-4x) with software that can't open ELF production file and need to manually set the fuse, here are the required fuses settings:
Ext.Clock; Start-Up time: 14CK+ 0ms; [CKSEL=00 SUT=00]
I have both the universal programmer, but mostly use my GQ-4x programmer. Where do you set the fuses?
Sorry for the newb question. I have not done that before. Thanks in advance.

Re: New CIC Clone by Krikzz available (AVRCICZZ)

Posted: Mon Feb 11, 2013 11:32 pm
by SkinnyV
You set the device to attiny13 and then you click on the CFG button in the top menu at the right of the ID button.

Re: New CIC Clone by Krikzz available (AVRCICZZ)

Posted: Tue Feb 12, 2013 7:49 am
by DSC
Thank you. I will try it as soon as they get shipped in. :D

Re: New CIC Clone by Krikzz available (AVRCICZZ)

Posted: Tue Feb 12, 2013 11:57 am
by Bregalad
Is it pin-to-pin compatible with the CIClone ?

Re: New CIC Clone by Krikzz available (AVRCICZZ)

Posted: Tue Feb 12, 2013 12:07 pm
by thefox
Looks like it's based on http://thefox.aspekt.fi/Tengen.c (not that there's anything wrong with that). I'm kind of surprised it took this long for another clone to come out, though, all the info has been laying in that thread for years!

Re: New CIC Clone by Krikzz available (AVRCICZZ)

Posted: Tue Feb 12, 2013 12:08 pm
by infiniteneslives
Bregalad wrote:Is it pin-to-pin compatible with the CIClone ?
No, the t13 is inherently incompatible with the pic, due to differences in power pins.

Re: New CIC Clone by Krikzz available (AVRCICZZ)

Posted: Tue Feb 12, 2013 4:52 pm
by Drakon
thefox wrote:Looks like it's based on http://thefox.aspekt.fi/Tengen.c (not that there's anything wrong with that). I'm kind of surprised it took this long for another clone to come out, though, all the info has been laying in that thread for years!
Yeah but you're like a god at this stuff, us mere mortals are still trying to play catch up.

Re: New CIC Clone by Krikzz available (AVRCICZZ)

Posted: Wed Feb 13, 2013 7:43 pm
by SkinnyV
Krikzz updated the code because first version had issue on PAL nes. He is still looking to have it tested with Asian and UK/Italy/Australia NES version.

Re: New CIC Clone by Krikzz available (AVRCICZZ)

Posted: Wed Feb 13, 2013 8:34 pm
by DSC
Thank you for the update.
I will still test when I get the chips in. :D

Re: New CIC Clone by Krikzz available (AVRCICZZ)

Posted: Thu Feb 14, 2013 6:19 pm
by zzo38
Can new one function in both key and lock mode, and enable/disable NTSC and PAL separately?

Re: New CIC Clone by Krikzz available (AVRCICZZ)

Posted: Sat Jun 29, 2013 4:39 am
by chromableedstudios
for anyone else that had trouble finding the new link: http://krikzz.com/pub/support/index.php ... evelopment

as mentioned in the discussion here: http://krikzz.com/forum/index.php?topic=341.45