Coredump tool
Moderator: Moderators
Coredump tool
stack overflow screen I did awhile back. When installed at the reset vector this can be use for two things: for debugging games that crash while on a unmodified console, and for scientifically getting data on the initial contents of NES ram. Perhaps even convincing emulator authors to ditch the arbitrary 0x00000000ffffffff pattern.
I hope that even though this compiles to a hefty 485 bytes, that it can be part of NES power-on self-test (POST)
Coredump is a tool that prints the contents of the NES internal ram given a key combo on reset. This is an improved version of the I hope that even though this compiles to a hefty 485 bytes, that it can be part of NES power-on self-test (POST)
- Attachments
-
- coredump-v1.0.nes
- (16.02 KiB) Downloaded 1338 times
-
- coredump-v1.0.asm
- (11.37 KiB) Downloaded 830 times
Re: Coredump tool
I think that would be only FCEUX, though.43110 wrote:Perhaps even convincing emulator authors to ditch the arbitrary 0x00000000ffffffff pattern.
The test program is nice and simple, I like it!
Download STREEMERZ for NES from fauxgame.com! — Some other stuff I've done: fo.aspekt.fi
Re: Coredump tool
Perhaps you should write a DEADBEEF or other RAM filler, to run before this, and see if RAM is part of it.Myask wrote:I wonder how much NES state the PowerPak clobbers between boot and game.
Obviously the PowerPak hits PPU registers, CPU status bits, and one register to LD* ST* in order to hit the PPU registers. It must also discard whatever data were in the controllers' shift registers, as it must to read from any of them.
---
[semi-offtopic hunk split off to start another topic]
Re: Coredump tool
The split post is relevant.
So I was working on this a bit (misfeature fixes, view nametables before overwriting, and sounds), and you got me thinking. Is it possible to stash the cpu registers by writing to OAM_DATA on reset, and retrieving them two blank frames later by cycling around OAM also with OAM_DATA? I don't plan on preserving OAM since it'll most likely have a mirror in RAM.
Edit: To answer my own question. No. OAM_DATA does not work like I expected. The best I can hope for is a brk with an IRQ vector that pushes A X and Y.
So I was working on this a bit (misfeature fixes, view nametables before overwriting, and sounds), and you got me thinking. Is it possible to stash the cpu registers by writing to OAM_DATA on reset, and retrieving them two blank frames later by cycling around OAM also with OAM_DATA? I don't plan on preserving OAM since it'll most likely have a mirror in RAM.
Edit: To answer my own question. No. OAM_DATA does not work like I expected. The best I can hope for is a brk with an IRQ vector that pushes A X and Y.
Last edited by JRoatch on Thu Aug 14, 2014 8:37 pm, edited 1 time in total.
Re: Coredump tool
Version 1.1 attached.
- $01 and stack pointer are now preserved in idle frames.
- added sounds.
The next version will be very different as I'll have to start using the nameables to store operating state to include the features I'm planning.
- $01 and stack pointer are now preserved in idle frames.
- added sounds.
The next version will be very different as I'll have to start using the nameables to store operating state to include the features I'm planning.
- Attachments
-
- coredump-v1.1.asm
- (12.17 KiB) Downloaded 788 times
-
- coredump-v1.1.nes
- (16.02 KiB) Downloaded 842 times
Re: Coredump tool
- This version is separated into a two parts: a boot backend and a GUI frontend. Boot stuffs things into CHR RAM, and GUI reads and prints them to the screen.
- New things now captured at boot are nametables and palette.
CHR RAM was decided to be used as scratch memory since everywhere else (except sram) is internal nes memory.
This will probably be the last version for a long while. If there is a next version, it will most likely be marked 2.0 along with a redesigned GUI.
Sorry if the multiple posts are getting annoying.
- Attachments
-
- coredump-v1.2.nes
- (16.02 KiB) Downloaded 829 times
-
- coredump-v1.2.asm
- (16.34 KiB) Downloaded 810 times
Re: Coredump tool
As I was chipping away at my framework code (and as a response to this)
I cleaned up the code a bit, and improved modularity.
The source is embedded in the rom, and will also come with an update to my framework code later.
I cleaned up the code a bit, and improved modularity.
The source is embedded in the rom, and will also come with an update to my framework code later.
- Attachments
-
- coredump-v1.3.nes
- (16.02 KiB) Downloaded 992 times
Re: Coredump tool
Hmm, could a clever use of serial outputs avoid using even CHR-RAM?
Idealogical
From: I have an idea. It seems logical. Thus everyone must agree.
Fail, fail, fail again. Keep trying, then maybe this damn thing will work. Eventually you might even know why it worked.
From: I have an idea. It seems logical. Thus everyone must agree.
Fail, fail, fail again. Keep trying, then maybe this damn thing will work. Eventually you might even know why it worked.
Re: Coredump tool
Probably.
Every version of coredump except v1.2 could technically use CHR-ROM, but the stack pointer needs to be restored from somewhere like the nametable because I use the stack pointer able to save byte $01.
There's also an issue of code size with simply using the same approach coredump does. Since one of the original goals was to preserve RAM, we can't use subroutines. So everything has to be duplicated inlined. While copies of the nibble printing code is OK, I wouldn't want to duplicate the multi-layered loops of bit banging serial output.
Every version of coredump except v1.2 could technically use CHR-ROM, but the stack pointer needs to be restored from somewhere like the nametable because I use the stack pointer able to save byte $01.
There's also an issue of code size with simply using the same approach coredump does. Since one of the original goals was to preserve RAM, we can't use subroutines. So everything has to be duplicated inlined. While copies of the nibble printing code is OK, I wouldn't want to duplicate the multi-layered loops of bit banging serial output.
Re: Coredump tool
Every byte of this code has been chipped down and optimized so that it all now fits in less then 2 pages at 496 bytes total, including the compressed font. If located at $fe00 there's even enough room for the reset vectors and a 10 byte reset stub!
This is all demonstrated by a 512 byte Mapper 218 ("single chip cart") NES2.0 file.
- Attachments
-
- coredump-v1.7.nes
- (528 Bytes) Downloaded 17 times
-
- coredump-v1.7.s
- (9.96 KiB) Downloaded 12 times