eprom and cartridge pinouts

Discuss hardware-related topics, such as development cartridges, CopyNES, PowerPak, EPROMs, or whatever.

Moderator: Moderators

Post Reply
dvoika
Posts: 3
Joined: Sun Oct 09, 2016 2:20 pm

eprom and cartridge pinouts

Post by dvoika »

Hello my friends :) i want try make famicom card but diagram/pinouts does not fit on pictures

27C256
Image

Image

Q7 is D7 ? and next and next... I'm confused pls help
whats EXP, E, G, where is chr /wr :D
User avatar
Memblers
Site Admin
Posts: 4044
Joined: Mon Sep 20, 2004 6:04 am
Location: Indianapolis
Contact:

Re: eprom and cartridge pinouts

Post by Memblers »

Yes, Q7 is D7. The EXP pins are audio in/out. /G is output enable, /E is chip enable. CHR /WR is only used with CHR-RAM, can't do anything with that if you're using ROM.

On the CHR side, CHR /RD would be connected to output enable, and usually CHR /A13 would be connected to chip enable.
dvoika
Posts: 3
Joined: Sun Oct 09, 2016 2:20 pm

Re: eprom and cartridge pinouts

Post by dvoika »

Here I have tried to break down, But I have a doubt is
???1,2,3,4,5,6,7 heelp please :mrgreen:
Image

???1 on (OE)
???3 is joint 44/32 pins and PRG A15 right? :( im comfused
Attachments
famicompins.png
User avatar
Memblers
Site Admin
Posts: 4044
Joined: Mon Sep 20, 2004 6:04 am
Location: Indianapolis
Contact:

Re: eprom and cartridge pinouts

Post by Memblers »

That pin 44 is what I call PRG /CE, it will be active (low) whenever the NES is accessing memory at $8000-$FFFF. So you'll probably want that connected to the /CE pin of your PRG-ROM.

Read the signal descriptions here, that should help clear things up.
http://wiki.nesdev.com/w/index.php/Cartridge_connector
dvoika
Posts: 3
Joined: Sun Oct 09, 2016 2:20 pm

Re: eprom and cartridge pinouts

Post by dvoika »

tnx !! and sorry my english
Post Reply