Question about "nes platte viewer.nes".See below:
Nestopia(emulator):
Nothing in the red box.
Feos's famicom:
Two dots in the red box.
HWM's famicom:
Four dots in the red box.
My test resault is the same to the HWM.
Why emulators have no these dots even with NTSC filter?
Why there is difference between feo and HWM's famicom?
Question about "nes platte viewer.nes"
Moderator: Moderators
Re: Question about "nes platte viewer.nes"
What kind of television / capture device was used to display the 2nd and 3rd results? It's possible that those extra dots are caused by a special NTSC decoder which has trouble with the PPU's slightly-out-of-spec signal (262.0 scanlines, 60.1Hz refresh).
Quietust, QMT Productions
P.S. If you don't get this note, let me know and I'll write you another.
P.S. If you don't get this note, let me know and I'll write you another.
Re: Question about "nes platte viewer.nes"
That or it's indentations caused by loading palette data during active picture. When a new color is written, it displays that color for about one pixel before advancing the write address to the next color.
Could you link the ROM?
Could you link the ROM?
Re: Question about "nes platte viewer.nes"
Yes,here is the rom.tepples wrote:That or it's indentations caused by loading palette data during active picture. When a new color is written, it displays that color for about one pixel before advancing the write address to the next color.
Could you link the ROM?