It is currently Wed Nov 22, 2017 7:11 pm

All times are UTC - 7 hours





Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Tue Apr 18, 2017 3:03 pm 
Offline

Joined: Sun Jun 12, 2011 12:06 pm
Posts: 245
Location: Poland
I got interesting famiclone, with a lot of weird jumpers (it does not have any built-in games). It is powered by single 26.601712 MHZ crystal.

Image Image

1. Closing or opening jumpers WRAM, VRAM, P1Y3/A5 does not change anything.
2. Jumpers OPT1, OPT2, OPT3 are quite interesting.
- When none of them are closed, console generates PAL video (the same as on Dendy or other famiclones - games which needs true PAL like Asterix does not work)
Image

- When OPT2 is closed, console generates NTSC video - the sound is a bit faster and the video aspect is not letter box as in PAL.
Image
To be honest, I dont know if it is real NTSC or PAL with 60HZ and less scanlines, because my TV can synchronize to this video when video source on TV is set as: PAL or as NTSC (when I plug in console which generates true NTSC on 21.417 MHZ crystal and UA6528&UA6527, when TV video source is set as PAL, the video cannot be vertically synchronized). So maybe this is not real NTSC?
The image shakes a little bit, which is vissible on the edges:
Image

-When OPT3 is closed, the console generates gray scale PAL video, although when TV in auto mode, the image is switching. When I force it to secam, it is still gray scale but more stable.
Here is comparision when TV is set to SECAM and OPT3 is closed or open - the image differs a bit on straight vertical edges.
Image

- When OPT1 is closed, the sound is like 150% faster, TV loses sync (althought something is displayed). Maybe it is for speeding-up game or when replacing crystal with 21 MHZ, it would generate true NTSC?
Image

All this playing with jumpers can be done on-the-fly, the game does not crash at all! :)


Top
 Profile  
 
PostPosted: Tue Apr 18, 2017 4:01 pm 
Offline

Joined: Sun Apr 13, 2008 11:12 am
Posts: 6448
Location: UK (temporarily)
krzysiobal wrote:
To be honest, I dont know if it is real NTSC or PAL with 60HZ and less scanlines, because my TV can synchronize to this video when video source on TV is set as: PAL or as NTSC (when I plug in console which generates true NTSC on 21.417 MHZ crystal and UA6528&UA6527, when TV video source is set as PAL, the video cannot be vertically synchronized). So maybe this is not real NTSC?
Pretty certain that's PAL60, because the chroma-into-luma crosstalk along vertical edges has a 6-scanline repeat pattern instead of 3-scanline.

Quote:
Maybe it is for speeding-up game or when replacing crystal with 21 MHZ, it would generate true NTSC?
Seems almost guaranteed...


Top
 Profile  
 
PostPosted: Tue Apr 18, 2017 4:08 pm 
Offline
User avatar

Joined: Sat Feb 12, 2005 9:43 pm
Posts: 10117
Location: Rio de Janeiro - Brazil
Is PAL60 different from PAL-M?


Top
 Profile  
 
PostPosted: Tue Apr 18, 2017 5:08 pm 
Offline

Joined: Sun Apr 13, 2008 11:12 am
Posts: 6448
Location: UK (temporarily)
Yes. PAL-60 is the standard 4.433MHz colorburst frequency instead of PAL-M's 3.575MHz.


Top
 Profile  
 
PostPosted: Tue Apr 18, 2017 6:16 pm 
Offline

Joined: Sun Jun 12, 2011 12:06 pm
Posts: 245
Location: Poland
Now time for next part of test - results are even more funny.
I switched the crystal from 26.601712 MHz to 21.47727 MHz.

-When no jumpers are present, the sound is about 50% slower and the video cannot synchronize (just like @26.601712MHz and OPT1 closed)

- When OPT1 is closed, I got grayscale PAL image.
Image

- When OPT1 + OPT3 are closed, no difference like above.

- When OPT1 + OPT2 are closed, I got coloued NTSC image. This time it appears to be true NTSC because TV can sync with it only when in NTSC mode. Hovewer, the colours are FAKE and there is weird checkboard pattern on the whole image. But the image is very stable.

Image Image Image

- When OPT1 + OPT2 + OPT3 are closed, I got perfect NTSC Image. This time colours are valid and no checkboard patter. However, music started sound weird (like 1 channel was cut off):
Image Image

So I suspect:
*OPT1 - is responsible for diving crystal
*OPT2 - turns between PAL/NTSC
*OPT3 - color phase or what?


Top
 Profile  
 
PostPosted: Tue Apr 18, 2017 7:48 pm 
Offline

Joined: Sun Apr 13, 2008 11:12 am
Posts: 6448
Location: UK (temporarily)
krzysiobal wrote:
- When OPT1 + OPT2 are closed, I got coloued NTSC image. This time it appears to be true NTSC because TV can sync with it only when in NTSC mode. Hovewer, the colours are FAKE and there is weird checkboard pattern on the whole image. But the image is very stable.
That almost looks like it's just the U component (or maaaaybe the I component?) of the video? That might be an artifact of the palettes in the sample games, though.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 7 hours


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group