It is currently Tue Nov 21, 2017 7:04 pm

All times are UTC - 7 hours



Forum rules


Related:



Post new topic Reply to topic  [ 252 posts ]  Go to page Previous  1 ... 12, 13, 14, 15, 16, 17  Next
Author Message
PostPosted: Mon Oct 16, 2017 9:50 pm 
Offline
User avatar

Joined: Sat Jun 27, 2009 11:05 pm
Posts: 713
Location: New Mexico, USA
I was already aware about 9mo or so ago that kevtris was working on FPGA SNES. I had inside knowledge from Taber at Analogue but I told him I would keep it secret. However, even having that knowledge I kind of always thought it should have been obvious what he was working on - I mean what else would he be working on? O.o

In any case, the two consoles have entirely different goals. My goal is to get the entire SNES design and additional information open sourced. Super Nt is obviously not going to be open sourced. Lol.

More VeriSNES updates to come!

Cya!


Top
 Profile  
 
PostPosted: Mon Oct 16, 2017 10:11 pm 
Offline

Joined: Wed Nov 30, 2016 9:59 pm
Posts: 54
jwdonal wrote:
I was already aware about 9mo or so ago that kevtris was working on FPGA SNES. I had inside knowledge from Taber at Analogue but I told him I would keep it secret. However, even having that knowledge I kind of always thought it should have been obvious what he was working on - I mean what else would he be working on? O.o

In any case, the two consoles have entirely different goals. My goal is to get the entire SNES design and additional information open sourced. Super Nt is obviously not going to be open sourced. Lol.

More VeriSNES updates to come!

Cya!


I put in a order for the Super NT anyway, but I still want to see how your project progresses. If you eventually release FPGA code for it, it may create an opportunity to "root" the SuperNT with it, assuming kevtris doesn't just do the same thing he did with the Analogue NT anyway.

_________________
I come from the net. Through systems, peoples and cities to this place.


Top
 Profile  
 
PostPosted: Tue Oct 17, 2017 11:02 pm 
Offline

Joined: Sun Nov 23, 2014 12:16 pm
Posts: 175
Just make your SNES console just a little bit cheaper than the competitors and then you will win in the end. Hahaha

I'm sure you will do fine and have the communities support. Especially after all the hard work you did. It is quite an accomplishment.


Top
 Profile  
 
PostPosted: Tue Oct 17, 2017 11:38 pm 
Offline
User avatar

Joined: Sat Jun 27, 2009 11:05 pm
Posts: 713
Location: New Mexico, USA
Erockbrox wrote:
I'm sure you will do fine and have the communities support. Especially after all the hard work you did. It is quite an accomplishment.
Thanks for the support! Like I said, since I already knew about it nothing has changed for me. I'm just gonna keep on doing what I do! I'm happy for Kevin, he's awesome!

:beer:


Top
 Profile  
 
PostPosted: Wed Oct 18, 2017 2:20 pm 
Offline
User avatar

Joined: Wed Dec 06, 2006 8:18 pm
Posts: 2803
Erockbrox wrote:
Just make your SNES console just a little bit cheaper than the competitors and then you will win in the end. Hahaha

I'm sure you will do fine and have the communities support. Especially after all the hard work you did. It is quite an accomplishment.


One stand out feature I'd like to see is Analog Video output. It looks as those the Super NT is going to be HDMI only which is a major bummer. I know Analog Displays are obsolete now but support for them is still very nice to have as the sorts of people interested in these things are often the type to have quality CRTs in their collection of equipment.


Top
 Profile  
 
PostPosted: Wed Oct 18, 2017 4:16 pm 
Offline

Joined: Sun Sep 19, 2004 11:12 pm
Posts: 19238
Location: NE Indiana, USA (NTSC)
Unless it uses HDCP (which it probably won't), you can use your analog computer monitors through an HDMI to VGA transcoder.


Top
 Profile  
 
PostPosted: Wed Oct 18, 2017 6:29 pm 
Offline

Joined: Sun Mar 27, 2011 10:49 am
Posts: 206
Location: NYC
Presumably (?) that'd add some lag, and one of the big reasons why people would want a hard-SNES/CRT combo is to minimize lag.


Top
 Profile  
 
PostPosted: Wed Oct 18, 2017 8:46 pm 
Offline

Joined: Sun Sep 19, 2004 11:12 pm
Posts: 19238
Location: NE Indiana, USA (NTSC)
As I understand it, 480p has the same timings over HDMI and VGA. This means a properly made converter would introduce less than a scanline of lag.


Top
 Profile  
 
PostPosted: Wed Oct 18, 2017 9:19 pm 
Offline

Joined: Fri Jul 04, 2014 9:31 pm
Posts: 801
Would that work with the Super Scope?


Top
 Profile  
 
PostPosted: Wed Oct 18, 2017 9:33 pm 
Offline

Joined: Sun Apr 13, 2008 11:12 am
Posts: 6447
Location: UK (temporarily)
Theoretically you should be able to convert each 8b10b chunk sent via TMDS over DVI/HDMI into an analog pixel with only a pixel's worth of latency. (This is what would be necessary for superscope functionality)

I have no idea if anyone does this outside of trivial demonstrations using a HDMI deserializer and a high-speed DAC. There seems to be a certain level of laziness that just leads to people throwing things into a framebuffer (and adding latency) even when it's unnecessary.


Top
 Profile  
 
PostPosted: Thu Oct 19, 2017 12:42 am 
Offline
User avatar

Joined: Fri Feb 09, 2007 5:01 pm
Posts: 233
Location: Nanaimo, BC Canada
Some of the last Sony 4:3 CRT TV's had HDMI inputs, I always keep my open for these on Craigslist and such.


Top
 Profile  
 
PostPosted: Thu Oct 19, 2017 4:53 am 
Offline

Joined: Sun Sep 19, 2004 11:12 pm
Posts: 19238
Location: NE Indiana, USA (NTSC)
93143 wrote:
Would that work with the Super Scope?

No. Unlike the Zapper, which I would expect to work on a 31 kHz CRT receiving a "100% scanlines" signal, the Super Scope is synchronized to the 5.37 MHz pixel clock, which is doubled even in 480p. You'd be able to hit only half the width of the screen, and even for that, the horizontal coordinate would be incorrect (squeezed horizontally) unless software is patched to compensate.

But in practice, whether Super Scope is a priority depends on the popularity of games that require the Super Scope. Which such games are compelling?


Top
 Profile  
 
PostPosted: Thu Oct 19, 2017 9:17 am 
Offline
User avatar

Joined: Sun May 27, 2012 8:43 pm
Posts: 1311
marvelus10 wrote:
Some of the last Sony 4:3 CRT TV's had HDMI inputs, I always keep my open for these on Craigslist and such.

Using these offers virtually no advantage over a modern HDTV, except for the potential appeal of phosphors themselves. These have image processors and scalers just the same as an HDTV, with a different output stage being the only difference.


Top
 Profile  
 
PostPosted: Thu Oct 19, 2017 10:15 am 
Offline
User avatar

Joined: Sun May 10, 2015 6:56 pm
Posts: 28
Location: Montréal
tepples wrote:
93143 wrote:
Would that work with the Super Scope?

No. Unlike the Zapper, which I would expect to work on a 31 kHz CRT receiving a "100% scanlines" signal, the Super Scope is synchronized to the 5.37 MHz pixel clock, which is doubled even in 480p. You'd be able to hit only half the width of the screen, and even for that, the horizontal coordinate would be incorrect (squeezed horizontally) unless software is patched to compensate.

But in practice, whether Super Scope is a priority depends on the popularity of games that require the Super Scope. Which such games are compelling?


240p is part of the HDMI spec. Some HDMI -> VGA converters support 240p, and will output a 15 kHz signal. All you've got to do to get that on a PVM is use a sync combiner. At that point, I should think the Super Scope would work fine, assuming the converter didn't use a framebuffer.


Top
 Profile  
 
PostPosted: Thu Oct 19, 2017 12:13 pm 
Offline
User avatar

Joined: Wed Dec 06, 2006 8:18 pm
Posts: 2803
The Super Scope does have some nice games, two of which are Battle Clash and the sequel Metal Combat.

I definitely think any SNES clone should output analog RGB and should be compatible with the Super Scope on a CRT. The Super Scope can be a lot of fun.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 252 posts ]  Go to page Previous  1 ... 12, 13, 14, 15, 16, 17  Next

All times are UTC - 7 hours


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group