NES Toploader Controller Port 2 will not work

Discuss hardware-related topics, such as development cartridges, CopyNES, PowerPak, EPROMs, or whatever.

Moderator: Moderators

Post Reply
toploaderleo
Posts: 4
Joined: Thu Aug 03, 2017 7:04 pm

NES Toploader Controller Port 2 will not work

Post by toploaderleo »

Hello I'm working on another Toploader, different from my previous post. This one works fine except controller port 2. The first controller works just fine but controller port 2 goes not have any input. I'm pretty sure it's not the controller port itself because I checked the port for continuity, tested fine, tested to make sure it was getting +5, so as far as I can tell the port is fine. I can try swapping it with the other one I'm working on but was trying to avoid that. I think I'll try it after I post this but not super hopeful. I also replaced DA4, DA5 & U8 with no change. Wondering where I should go next.
Airbits
Posts: 3
Joined: Sat Jan 06, 2018 12:06 pm

Re: NES Toploader Controller Port 2 will not work

Post by Airbits »

pics?
Chips
Posts: 2
Joined: Mon Jan 29, 2018 4:22 pm

Re: NES Toploader Controller Port 2 will not work

Post by Chips »

NVM, I was thinking of SNES.
Post Reply